L322 Range Rover Service Procedures
DRIVESHAFTS
REPAIRS
47-11
6. Remove nuts securing anti-roll bar links and
release links from anti-roll bar.
7. Remove nut securing height sensor link to
lower arm and release link.
Caution: use an open ended spanner on
flats provided to prevent ball joint rotating.
8. Loosen bolt securing lower arm to subframe
one quarter of a turn.
9. Remove nut securing lower arm ball joint to
hub.
10. Using LRT-54-027 release lower arm ball joint
and disconnect lower arm from hub.
Caution: ensure ball joint seal is not
damaged. A damaged seal will lead to
premature failure of the joint.
11. Loosen bolt securing tie rod to subframe one
quarter of a turn.
12. Remove nut securing tie rod to ball joint.
M60 0787
LRT -54-027