Range Rover P38
12
ENGINE
NEW RANGE ROVER
16
REPAIR
161. Fit ECM.
See FUEL SYSTEM, Repair.
162. Fit throttle and cruise control cables to abutment
bracket. Secure cruise control cable with ’C’ clip.
163. Position cable trunnions to throttle linkage.
Secure with clevis and split pins.
164. Adjust throttle cable free-play.
See FUEL
SYSTEM, Adjustment.
165. Adjust cruise control cable.
See CRUISE
CONTROL, Adjustment.
166. Fit intake hose and air flow meter assembly to
plenum chamber. Secure with clip. Connect
multiplug to air flow meter.
167. Connect multiplug to purge valve.
168. Position purge valve on shock absorber turret.
Secure with bolt.
169. Connect purge hose to ram pipe housing.
170. Secure harness to clip on intake hose.
171. Fit air cleaner.
See FUEL SYSTEM, Repair.
172. Remove plugs from fuel hoses and fuel rail
connections.
173. Connect fuel feed pipe to fuel rail. Tighten to
16
Nm (12 lbf.ft)
174. Connect return hose to pressure regulator pipe.
Secure with clip.
175. Refit battery.
See ELECTRICAL, Repair.
176. With assistance, release bonnet stay clips.
Engage bonnet struts.
CAUTION: Ensure bonnet stay clips are
returned to their original positions as
shown.
177. Start engine. Check for fuel, coolant and oil
leaks.
ENGINE AND ANCILLARIES - from 99MY
Service repair no - 12.41.01.99
Remove
1. Drain engine oil and remove oil filter.
2. Remove radiator.
See COOLING SYSTEM,
Repair.
3. Remove ignition coils.
See FUEL SYSTEM,
Repair.
4. Position absorbent material to catch any fuel
spillage and disconnect fuel pipe from rail.
CAUTION: Plug the connections.
5. Disconnect MAF sensor multiplug.
