GASKET - FRONT COVER - from 99MY
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › GASKET - FRONT COVER - from 99MY
LAND ROVER V8
29
REPAIR
GASKET - FRONT COVER - from 99MY
Service repair no - 12.65.04
Remove
1. Remove oil pick-up strainer.
See this section.
2. Remove front cover oil seal.
See this section.
3. Drain cooling system.
See COOLING SYSTEM,
Repair.
4. Remove bolt securing auxiliary belt jockey pulley
and remove pulley.
5. Remove 3 bolts securing water pump pulley and
remove pulley.
6. Release clip and disconnect bottom hose from
radiator.
7. Release clip and disconnect top hose from
radiator.
8. Release clip and disconnect coolant hose from
water pump.
9. Release thermostat housing from radiator cowl
and move hoses clear of front cover.
Parts & tools for this job For Land Rover Range Rover
- PARTEngine gasket setSearch: Land Rover Range Rover engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.