Brake pedal height adjustment
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Conventional Brake System › Brake pedal height adjustment
Fig. 4: Inspecting Brake Pedal Height
Courtesy of MAZDA MOTORS CORP.
BRAKE PEDAL HEIGHT ADJUSTMENT
CAUTION: The brake switch may not operate normally after adjusting the pedal height. Whenever adjusting the pedal height, replace the brake switch with a new one.
The interlock cable may not operate normally after adjusting the pedal height. Whenever adjusting the pedal height, refer to the interlock cable installation note. (See INTERLOCK CABLE INSTALLATION NOTE .)
- Loosen the locknut and turn the push rod to adjust the pedal height.
- Tighten the locknut.
Tightening torque
20.4-30.6 N.m {2.09-3.12 Kgf.m, 15.0-22.5 ft.lbf}
- After adjustment, inspect the pedal play.
Parts & tools for this job For 2006 Mazda MX-5
- PARTBrake padsSearch: Mazda MX-5 2006 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.