Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Vacuum line inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Conventional Brake System › Vacuum line inspection
BrakesVacuum line inspection
BRAKES – Conventional Brake System – figure
Fig. 2: Brake Bleeding Procedure
Courtesy of MAZDA MOTORS CORP.

VACUUM LINE INSPECTION

  1. Remove the vacuum hose between the power brake unit and the intake manifold using pliers.
  2. Verify that air can be blown from the power brake unit side of the vacuum hose towards the intake manifold side, and that air cannot be blown in the opposite direction.
    • If there is any malfunction of the inner check valve, replace it together with the vacuum hose as a single unit.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.