Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Piston disassembly note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Conventional Brake System › Piston disassembly note
BrakesPiston disassembly note

Fig. 37: Exploded View Of Caliper (Front) (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.

  1. Assemble in the reverse order of disassembly.

PISTON DISASSEMBLY NOTE

CAUTION: The piston could be damaged if blown out with great force. Blow the compressed air slowly to prevent the piston from suddenly popping out.

  1. Insert a piece of wood in the caliper as shown in Fig. 38 , and then blow compressed air through the bleeder screw hole to remove the piston from the caliper body.
BRAKES – Conventional Brake System – figure
Fig. 38: Removing Piston From Caliper Body By Blowing Compressed Air Through Bleeder Screw
Hole
Courtesy of MAZDA MOTORS CORP.

REAR BRAKE (DISC) INSPECTION

BRAKE JUDDER REPAIR HINTS

Description

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.