Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Piston disassembly note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Conventional Brake System › Piston disassembly note
BrakesPiston disassembly note · page 1 of 2

Fig. 49: Exploded View Of Caliper (Rear) (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.

  1. Assemble in the reverse order of disassembly.

PISTON DISASSEMBLY NOTE

  1. Rotate the piston counter-clockwise using the SST , remove the piston from the caliper body.
BRAKES – Conventional Brake System – figure
Fig. 50: Rotating Piston Counter-Clockwise Using SST
Courtesy of MAZDA MOTORS CORP.

DUST SEAL, PISTON ASSEMBLY NOTE

  1. Assemble the dust seal to the piston.
  2. Assemble the lip of the dust seal to the groove of the caliper body with the dust seal is assembled to the piston as shown in Fig. 51 .

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.