Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Front brake (disc) inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Conventional Brake System › Front brake (disc) inspection
BrakesFront brake (disc) inspection
BRAKES – Conventional Brake System – figure
Fig. 29: Dual Proportioning Valve Fluid Pressure Graph
Courtesy of MAZDA MOTORS CORP.

DUAL PROPORTIONING VALVE FLUID PRESSURE SPECIFICATIONS

MASTER CYLINDER PRESSURE (kPa

REAR BRAKE PRESSURE (kPa {kgf/cm2 ,

{kgf/cm2 , psi})

psi})

A: 3,430 {34.98, 497.5}

A': 3,130 {31.92, 453.9} - 3,730 {38.04, 540.9}

B: 5,880 {59.96, 852.8}

B': 4,010 {40.9, 581.7} - 4,810 {49.05, 697.6}

FRONT BRAKE (DISC) INSPECTION

BRAKE JUDDER REPAIR HINTS

Description

  1. Brake judder concern has the following 3 characteristics:

Steering Wheel Vibration

  1. Steering wheel vibrates in the rotation direction. This characteristic is most noticeable when applying brakes at a vehicle speed of 100-140 km/h {62.1-86.8 mph} .

Floor Vibration

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.