Disc Plate Thickness Inspection
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Conventional Brake System › Disc Plate Thickness Inspection
BrakesDisc Plate Thickness Inspection
Courtesy of MAZDA MOTORS CORP.
Disc Plate Thickness Inspection
CAUTION: Excessive runout may result if the disc plate is removed from the vehicle then machined. Machine the disc plate while installed on the vehicle.
- Measure the thickness of the disc plate.
- If the thickness is not within the specification, replace the disc plate.
Minimum front disc plate thickness
20 mm {0.79 in}
Minimum front disc plate thickness after machining using a brake lathe on-vehicle
20.8 mm {0.82 in}
Disc Pad Thickness Inspection
Parts & tools for this job For 2006 Mazda MX-5
- PARTBrake padsSearch: Mazda MX-5 2006 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.