Power Brake Unit Fluid Pressure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Conventional Brake System › Power Brake Unit Fluid Pressure
BrakesPower Brake Unit Fluid Pressure · page 1 of 3
Power Brake Unit Fluid Pressure
POWER BRAKE UNIT FLUID PRESSURE SPECIFICATIONS
Vacuum amount at o kPa {0 mmHg, 0 inHg}
Pedal force (N {kgf, lbf})
Fluid pressure (kPa {kgf/cm2 , psi})
200 {20.4, 44.9}
620 {6.33, 90.0} or more
Hydraulic Pressure Inspection
- Start the engine and when the vacuum amount reaches 66.7 kPa {500 mmHg, 19.7 inHg} , depress the brake pedal.
- At this time, apply the indicated pedal force and if the fluid pressure is within the specification, the unit is normal.
Power Brake Unit Fluid Pressure
POWER BRAKE UNIT FLUID PRESSURE SPECIFICATIONS
Vacuum amount at 66.7 kPa {500 mmHg, 19.7 inHg}
Pedal force (N {kgf, lbf})
Fluid pressure (kPa {kgf/cm2 , psi})
200 {20.4, 44.9}
6,340 {64.65, 919.6} or more
POWER BRAKE UNIT REMOVAL/INSTALLATION
- Remove the master cylinder. (See MASTER CYLINDER REMOVAL/INSTALLATION .)
- Remove the clutch pipe. (MT)
Parts & tools for this job For 2006 Mazda MX-5
- PARTBrake padsSearch: Mazda MX-5 2006 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.