Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Brake pedal inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Conventional Brake System › Brake pedal inspection
BrakesBrake pedal inspection · page 1 of 2
BRAKES – Conventional Brake System – figure
Fig. 3: Inspecting Vacuum Line Check Valve
Courtesy of MAZDA MOTORS CORP.

BRAKE PEDAL INSPECTION

BRAKE PEDAL HEIGHT INSPECTION

  1. Measure the distance from the center of the upper surface of the pedal pad to the insulator and verify that it is as specified.
    • If not within the specification, adjust the pedal height.

Brake pedal height (reference value) 167 mm {6.57 in}

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.