Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Steering Wheel Vibration

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Conventional Brake System › Steering Wheel Vibration
BrakesSteering Wheel Vibration
  1. Brake judder concern has the following 3 characteristics:

Steering Wheel Vibration

  1. Steering wheel vibrates in the rotation direction. This characteristic is most noticeable when applying brakes at a vehicle speed of 100-140 km/h {62.1-86.8 mph} .

Floor Vibration

  1. When applying the brakes, the vehicle body shakes back and forth. The seriousness of the shaking is not influenced by vehicle speed.

Brake Pedal Vibration

  1. When applying brakes, a pulsating force tries to push the brake pad back. The pulsation is transmitted to the brake pedal.
  2. The following are the main possible causes of brake judder:

Due to an excessive runout (side-to-side wobble) of the disc plate, the thickness of the disc plate is uneven.

  1. If the runout is more than 0.05 mm {0.002 in} at the position 10 mm {0.39 in} from the disc plate edge, uneven wear occurs on the disc plate because the pad contacts the plate unevenly.
  2. If the runout is less than 0.05 mm {0.002 in} , uneven wear does not occur.

The disc plate is deformed by heat.

  1. Repeated panic braking may raise the temperature in some portions of disc plate by approx. 1,000°C {1,832°F} . This results in a deformed disc plate.

Due to corrosion, the thickness and friction coefficient of disc plate change.

  1. If a vehicle is parked in damp conditions for a long time, corrosion occurs on the friction surface of disc plate.
  2. The thickness of corrosion is uneven and sometimes appears like a wave pattern, which changes the friction coefficient and causes a reaction force.

Inspection and Repair Procedure

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.