Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Brake pedal removal note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Conventional Brake System › Brake pedal removal note
BrakesBrake pedal removal note

one when replacing the power brake unit or the pedal, or performing any procedure that changes the pedal stroke.

  • When replacing the brake pedal (AT), it is possible that the installation of the interlock cable could become defective. Always refer to the interlock cable installation note when replacing the brake pedal. (See INTERLOCK CABLE INSTALLATION NOTE .)

NOTE: When the brake switch connector is connected to the brake switch, the clearance between the pedal and the brake switch is adjusted automatically. However, this mechanism will only function one time.

  1. Remove in the order indicated in Fig. 7.
  2. Install in the reverse order of removal.
BRAKES – Conventional Brake System – figure
Fig. 7: Identifying Brake Pedal Components (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.

BRAKE PEDAL REMOVAL NOTE

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.