Brake Pedal Vibration
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Conventional Brake System › Brake Pedal Vibration
BrakesBrake Pedal Vibration
- When applying the brakes, the vehicle body shakes back and forth. The seriousness of the shaking is not influenced by vehicle speed.
Brake Pedal Vibration
- When applying brakes, a pulsating force tries to push the brake pad back. The pulsation is transmitted to the brake pedal.
- The following are the main possible causes of brake judder:
Due To An Excessive Runout (Side-To-Side Wobble) Of The Disc Plate, The Thickness Of The Disc Plate Is Uneven
- If the runout is more than 0.05 mm {0.002 in} at the position 10 mm {0.39 in} from the disc plate edge, uneven wear occurs on the disc plate because the pad contacts the plate unevenly.
- If the runout is less than 0.05 mm {0.002 in} , uneven wear does not occur.
The Disc Plate Is Deformed By Heat
- Repeated panic braking may raise the temperature in some portions of disc plate by approx. 1,000°C {1,832°F} . This results in a deformed disc plate.
Due To Corrosion, The Thickness And Friction Coefficient Of Disc Plate Change
- If a vehicle is parked in damp conditions for a long time, corrosion occurs on the friction surface of disc plate.
- The thickness of corrosion is uneven and sometimes appears like a wave pattern, which changes the friction coefficient and causes a reaction force.
Inspection and Repair Procedure
Parts & tools for this job For 2006 Mazda MX-5
- PARTBrake padsSearch: Mazda MX-5 2006 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.