Replacement (page 2 of 2)
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Repairs
Engine management system – PGM-FiReplacement · page 2 of 2
- If there is continuity carry on following the procedure.
- Attach the battery positive terminal to the No. 3 terminal and the battery negative terminal to the No. 8 terminal of the PGM – Fi main relay. Then check that there is continuity between the No. 5 terminal and No. 7 terminal of the PGM – Fi main relay.
- If there is continuity, the PGM – Fi main relay is OK.
- If there is no continuity, replace the PGM – Fi main relay and retest.
Parts & tools for this job For Rover 600
- PARTEngine gasket setSearch: Rover 600 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.