Cooling - KV6
- Make
- Rover
- Model
- 800 Workshop Manual
- Year
- 1996–1999
- Section
- Torque wrench settings › Cooling - KV6
InformationCooling - KV6
COOLING - KV6
| Cooling fan cowl nuts | 6 Nm |
| Fan motor to housing, nuts | 9 Nm |
| Thermostat housing bolt | 15 Nm |
| Coolant temperature sensor | 15 Nm |
| Coolant pump bolts * | 9 Nm |
| Cylinder block drain plug | 20 Nm |
COOLING - DIESEL
| Thermostat housing bolts | 11 Nm |
| Coolant temperature sensor | 18 Nm |
| Coolant pump housing nuts | 25 Nm |
| Coolant pump pulley nut | 137 Nm |
| Coolant manifold to cylinder head, bolts * | 11 Nm |
| Cooling fan cowl nuts | 6 Nm |
| Cooling fan nut | 6 Nm |
| Intercooler to radiator bolts | 9 Nm |
MANIFOLDS AND EXHAUST - KV6
| Front pipe to manifold nuts | 45 Nm |
| Catalytic converter nuts | 45 Nm |
| Exhaust intermediate pipe nuts | 45 Nm |
| Exhaust tail pipe nuts | 45 Nm |
| Exhaust mounting bracket bolts | 10 Nm |
| Catalytic converter heat shield bolts | 7 Nm |
| Centre heatshield bolts | 10 Nm |
| Rear heat shield bolts | 10 Nm |
| Exhaust manifold bolts | 45 Nm |
| Exhaust manifold bracket to cylinder head nuts | 45 Nm |
| Exhaust manifold to sump screws | 25 Nm |
| Inlet manifold to cylinder head nuts | 25 Nm |
| Inlet manifold bracket to cam cover screws | 25 Nm |
| Plenum chamber to inlet manifold nutd/bolts | 35 Nm |
| Oxygen sensor to exhaust manifold | 40 Nm |
* = Tighten in sequence
Parts & tools for this job For 1996 Rover 800
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Rover 800
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.