Front beam (page 4 of 4)

Refit

1. With assistance, offer beam to body and engage lower arms.
2. Fit bolts securing beam to body. DO NOT tighten bolts.
3. Position PAS pipe to beam and secure with bolt.
4. Tighten bolts securing beam to body to 100 Nm.
5. Fit evaporative emission canister vent hose to beam.
6. Position PAS pipe to beam and secure with bolt.
7. Fit bolts securing anti-roll bar to anti-roll bar links and tighten to 45 Nm.
8. Fit bolts securing lower arms to beam and tighten to 45 Nm.
9. Fit steering rack. See STEERING, Repairs.
10. Fit exhaust front pipe. See MANIFOLD & EXHAUST SYSTEMS, Repairs.
11. Fit road wheel(s) and tighten nuts to correct torque. See INFORMATION, Torque wrench settings.
12. Remove stand(s) and lower vehicle.