Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat 500 Factory Service Manual (2007-2024)22 · Fault diagnosis
22 · Diagnostics

Number plate lights not working

Make
Fiat
Model
500 Factory Service Manual
Year
2007–2024
Section
Lights › Number plate lights not working
Fault diagnosisNumber plate lights not working

NUMBER PLATE LIGHTS NOT WORKING

1.2 8v, 1.3 Multijet, 1.4 16v

The number plate lights are switched on separately (RH and LH) by the Body Computer Node when the Side Lights on signal is received.

Test results
1CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation

Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node:

- that there are no faults.

Move on to Step 3Number plate lights short circuited to earth or open circuitMove on to Step 2
2ELECTRICAL SYSTEM CHECKAll OKProblems encounteredOperation

Also check the condition of the affected RH or LH bulb/s.

- Check the continuity and insulation of the wiring between the connections on the Body Computer and the number plate light connector or the affected RH or LH wiring;

- Check the continuity and efficiency of the number plate light earth;

- Check the condition of the number plate light bulb internal circuit

See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

Move on to Step 3

1. Bulbs inefficient.

2. Connection between Body computer and number plate light connector O.C. or S.C.

3. Earth interrupted or inefficient.

4. Connection with open circuit or short circuit

1. Replace the bulbs or bulb

2. Restore the electrical connection

See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

3. Restore the electrical connection

See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

4. Replace the light

Op. 5540A94 (ONE) NUMBER PLATE LIGHT - R.R.

3CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Keeping the Examiner diagnostic equipment connected, check the operation of the number plate light bulbs in active diagnosis.End of diagnosis.No lights come on.

Replace body computer

Op. 5505A32 BODY COMPUTER - R.R

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.