Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat 500 Factory Service Manual (2007-2024)22 · Fault diagnosis
22 · Diagnostics

(side) brake lights not working

Make
Fiat
Model
500 Factory Service Manual
Year
2007–2024
Section
Lights › (side) brake lights not working
Fault diagnosis(side) brake lights not working

(SIDE) BRAKE LIGHTS NOT WORKING

1.2 8v, 1.3 Multijet, 1.4 16v

The brake lights are not working; the third brake light is working normally;

N.B: The RH and LH Brake Lights are operated directly by the Body Computer Node using information coming from the Brake Lights switch.

Test results
1CHECK USING DIAGNOSTIC EQUIPMENT.All OKProblems encounteredOperation

Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node:

  • that there are no faults at the Brake Lights
  • the operation of the Brake Lights through active diagnosis
  • the plausibility of the Brake Lights On/Off parameter
Move on to Step 6

1. Presence of error at Brake Lights bulbs

2. The lights do not come on

3. The lights come on

1. Continue following the instructions for the diagnostic equipment

2. Move on to Step 2

3. Move on to Step 5

2ELECTRICAL SYSTEM CHECK.All OKProblems encounteredOperation

Check the continuity/insulation between the Body Computer Node and the rear brake lights

See E2021 BRAKE LIGHTS

Move on to Step 3Wiring faultyRestore the correct electrical connection
3BRAKE LIGHT BULB CHECKAll OKProblems encounteredOperation
Bulb efficiency checkMove on to Step 4Brake light bulb faultReplace the brake light bulbs
4REAR LIGHTS CHECKAll OKProblems encounteredOperation
Check the condition of the rear light clustersMove on to Step 5Rear light clusters faultyRestore operation, replace lights if necessary
5WIRING CHECKAll OKProblems encounteredOperation
Check the condition of the wiring between the brake light switch and the Body ComputerMove on to Step 6Wiring faulty.Restore the correct electrical connection
6CORRECT OPERATION CHECKAll OKProblems encounteredOperation
Check that the fault is no longer presentEnd of diagnosisThe fault persists.

Replace body computer

Op. 5505A32 BODY COMPUTER - R.R

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.