Engine RPM sensor - r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Diesel injection system › Engine RPM sensor - r.r.
EngineEngine RPM sensor - r.r.
ENGINE RPM SENSOR - R.R.
Removing
- Position the vehicle on a lift.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
1. Disconnect the electrical connection for the engine rpm sensor.
| Description | Connector | |
|---|---|---|
| 1 | Rpm sensor | See K046 RPM SENSOR |
2. Undo bolt (2a) and remove rpm sensor (2b).
Refitting
- Place the engine rpm sensor in its housing and secure it by tightening the bolt to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Rpm sensor | Bolt | M6 | 0.8 ÷ 1.0 | 1.9 JTD |
- Connect the electrical connection for the engine rpm sensor.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Remove the vehicle from the lift.
Parts & tools for this job For 2007 Fiat Bravo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.