Diesel electronic injection control unit - r.r
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Diesel injection system › Diesel electronic injection control unit - r.r
DIESEL ELECTRONIC INJECTION CONTROL UNIT - R.R
Removing
If the diesel electronic injection system control unit is being replaced, when the refitting is complete the following operations must be carried out using the Examiner.
Only for versions with DPF, if the diesel electronic injection system control unit is being replaced, the engine oil must be changed with reference to
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Disconnect the electrical connections from the injection control unit.
| Description | Connector | |
|---|---|---|
| 1 | Engine management control unit | See M010 ENGINE MANAGEMENT ECU |
2. Undo nuts (2a) and remove injection control unit (2b).
Refitting
- Place the injection control unit back in its housing and secure it to the mounting bracket using the nuts.
- Connect the electrical connections to the control unit.
Parts & tools for this job For 2007 Fiat Bravo
- PARTGlow plugsSearch: Fiat Bravo 2007 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.