EXCESS PRESSURE SENSOR - R.R.

Operation 1060G16 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

1.9 JTD 8v

Removing

- Disconnect the negative battery terminal.

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Detach the pressure relief sensor electrical connection.

2. Undo bolts (2a) and remove excess pressure sensor (2b).

Refitting

- Position the excess pressure sensor in its housing and secure it using the bolt.

- Secure the electrical connection for the pressure relief sensor.

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Connect the negative battery terminal (-).

1.9 JTD 16v

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Undo the bolt securing the rigid oil vapour pipe on the side of the return pipe leading to the water pump.

2. Loosen the collar and disconnect the oil vapour pipes.

1. Undo the bolt securing the rigid oil vapour pipe, intake chamber side, and move aside.

1. Detach the pressure relief sensor electrical connection.

2. Undo bolts (2a) and remove excess pressure sensor (2b).

Refitting

- Position the excess pressure sensor in its housing and secure it using the bolt.

- Secure the electrical connection for the pressure relief sensor.

- Refit the oil vapour rigid pipe and tighten the bolts.

- Connect the oil vapour pipes and secure the collar.

Op. 1016A10 SOUND-PROOFING COVER - R.R