Display does not show headlamp alignment data
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Instrument panel › Display does not show headlamp alignment data
Fault diagnosisDisplay does not show headlamp alignment data
DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA
When theMode+ and Mode- buttons which control the headlamp alignment are operated (with the dipped headlamps on) the information on the display does not change. If the headlamp alignment is not working
See table I080 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING
| 1 | HEADLAMP ALIGNMENT ELECTRICAL CIRCUIT CHECK | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Check: - connection between centre control panel in dashboard and instrument panel; - Earthh connection for panel in dashboard | Move on to Step 2 | Connections not correct | Restore the correct connections | |
| Earth defective | Restore correct earth contacts | |||
| Control panel in dashboard defective | Replace the centre control panel in the dashboard | |||
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
| Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that all the display segments are working properly at the Instrument Panel in active diagnosis | Move on to Step 3 | One or more segments not working | Replace the instrument panel |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.