Instrument lights not working
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Instrument panel › Instrument lights not working
‹ Prev Lights failure warning light on/left front diagonalNext › Instrument lights dimmer not working
Fault diagnosisInstrument lights not working
INSTRUMENT LIGHTS NOT WORKING
The instruments do not light up with the ignition ON.
The side lights work properly
| Test results | ||||
| 1 | ACTIVE DIAGNOSIS CHECK | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| With the Examiner in Instrument Panel Node mode, check that the instrument panel light is correctly activated in Active Diagnosis | Move on to Step 2 | The panel lighting does not activate | Replace the Instrument Panel | |
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
| Use an Examiner to check the possibility of connection to the Body Computer Node | Move on to Step 3 | Impossible to connect to the Body Computer control unit | Replace the Body Computer Node | |
| 3 | CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Contact technical service for further information on the problem | |
‹ Prev Lights failure warning light on/left front diagonalNext › Instrument lights dimmer not working
Parts & tools for this job For 2007 Fiat Bravo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.