Passenger airbag disablement warning light flashing
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Instrument panel › Passenger airbag disablement warning light flashing
PASSENGER AIRBAG DISABLEMENT WARNING LIGHT FLASHING
On starting the "Passenger Air Bag Disabled" warning light comes on for 4 seconds, goes out and then flashes constantly.
The flashing of the "Passenger Air Bag Disabled" warning light indicates a fault in the AIR BAG warning light control circuit.
| TEST RESULTS | ||||
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Connect the Examiner diagnostic equipment to the diagnostic socket. Check that there are no faults | Move on to Step 2 | Presence of errors in the control unit | Continue by following the instructions on the diagnostic instrument. | |
| 2 | ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check that the connection between the Air Bag Control Unit and Instrument Panel is correct | Move on to Step 3 | Fault in wiring | Replacing wiring | |
| 3 | CORRECT OPERATION CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the Air Bag control unit | |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.