Mil warning light on (engine does not start)
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Instrument panel › Mil warning light on (engine does not start)
Fault diagnosisMil warning light on (engine does not start)
MIL WARNING LIGHT ON (ENGINE DOES NOT START)
The engine control unit warning light stays on. The CODE warning light goes on and off.
N.B.: If the CODE warning light goes off, this means that the communication between both control units has been successful.
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Connect the diagnostic test equipment (Examiner or other instruments) to the tester input. Check for errors saved in the control unit. | Move on to Step 2 | Error detected in the control unit | Proceed as instructed by the diagnostic tester | |
| 2 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Continue as instructed in the See table B010 ENGINE DOES NOT START (UNDER ANY CIRCUMSTANCES) |
Parts & tools for this job For 2005 Fiat Croma
- PARTEngine gasket setSearch: Fiat Croma 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.