Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)22 · Fault diagnosis
22 · Diagnostics

Doors open check warning light on

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Instrument panel › Doors open check warning light on
Fault diagnosisDoors open check warning light on

DOORS OPEN CHECK WARNING LIGHT ON

After the initial test, the light check warning light on the Instrument Panel Node remains on.

with the side light control active and with fault status for one of the rear bulbs, the NBC implements a recovery strategy: the brake light bulb on the corresponding side comes on in low power mode to simulate the brightness of a 5 W bulb

0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION

Press the parking light activation button, move the steering wheel stalk and check the parking lights come on.

Press the emergency light switch and check they activate correctly.

Then turn the key ON and check the operation of the side lights/number plate lights.

Activate the rear fog lamp from the control panel and check they operate correctly.

Operate the side lights from the stalk and check they operate correctly

Press the brake pedal and check the brake lights come on

Move on to Step 11. Parking light bulb does not operate1. Continue as described by the diagnostic equipment
2. Side light/number plate light bulb does not operate2. Continue as described by the diagnostic equipment
3. Hazard light bulb does not operate3. Continue as described by the diagnostic equipment
4. Turn signal does not operate4. Continue as described by the diagnostic equipment
5. Rear fog lamp bulb does not operate5. Continue as described by the diagnostic equipment
6. Brake light bulb does not operate6. Continue as described by the diagnostic equipment
1CHECK ELECTRICAL CONNECTIONSALL OKPROBLEMS ENCOUNTEREDACTION
Check the electrical connections between the Body Computer and the light wiring, in particular that each individual pin is correctly connectedMove on to Step 2Electrical connections defectiveRenew the damaged electrical connections
2CHECK BULB POWER UPTAKEALL OKPROBLEMS ENCOUNTEREDACTION
Check that the light bulb power uptake is as specifiedMove on to Step 3Bulbs of incorrect power rating or with defective filamentReplace the bulbs
3CHECK INSTRUMENT PANELALL OKPROBLEMS ENCOUNTEREDACTION
Connect an Examiner to check for errors in the instrument panelMove on to Step 4Panel defective

Replace the instrument panel

Op. 5560B10 CONTROL PANEL - R+R

4CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer presentEnd of diagnosisThe fault persists

Replace Body Computer

Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.