Trip meter does not zero
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Instrument panel › Trip meter does not zero
Fault diagnosisTrip meter does not zero
TRIP METER DOES NOT ZERO
With the key on, the trip meter does not zero when the TRIP button on the right steering column switch unit lever is operated.
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Connect the Examiner equipment to the diagnostic socket. Check that there are no faults in the instrument panel | Move on to Step 2 | Presence of errors | Continue following the instructions for the diagnostic equipment | |
| 2 | ELECTRICAL CIRCUIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check:
| Move on to Step 3 | Connections defective, earth or power suply defective | Restore the correct connections, if necessary, replace the wiring. | |
| 3 | STEERING COLUMN SWITCH UNIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check that the TRIP button the right steering column switch unit lever is working properly | Move on to Step 4 | Right lever defective | Replace the steering column switch unit | |
| 4 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | End of diagnosis |
Parts & tools for this job For 2005 Fiat Croma
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Croma
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.