General failure warning light not working
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Instrument panel › General failure warning light not working
‹ Prev Seat belt not fastened warning light not workingNext › General failure warning light on constantly
Fault diagnosisGeneral failure warning light not working
GENERAL FAILURE WARNING LIGHT NOT WORKING
Even if one of the functions indicated to be faulty by the general fault warning light is faulty, the warning light does not light up on the control panel
N.B.: The functions that cause the general fault warning light to come on are as follows:
- Inertia switch operation (FIS)
- Speed limit exceeded
- Diesel filter sensor fault (only JTD)
- Engine oil pressure sensor failure
- Rain sensor fault (if fitted)
- Rain sensor fault (if fitted)
- Dusk sensor fault (if fitted)
- Window antipinch system fault (only for HIGH version)
- Speedometer signal fault
- Tyre inflation pressure monitoring failure
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
| Connect the diagnostic tester and check on the INSTRUMENT PANEL NODE the operation of the warning lights by means of active diagnosis | End of diagnosis | The warning light is not activated | Replace instrument panel |
‹ Prev Seat belt not fastened warning light not workingNext › General failure warning light on constantly
Parts & tools for this job For 2005 Fiat Croma
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Croma
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.