Display module no signal - to check panel
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Instrument panel › Display module no signal - to check panel
‹ Prev Mil warning light stays on (engine starts)Next › Display does not show headlamp alignment data
Fault diagnosisDisplay module no signal - to check panel
DISPLAY MODULE NO SIGNAL - TO CHECK PANEL
The display mode is turned on at the key on by the panel and shows the check information in progress for several seconds after which "Check OK" should appear.
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
| Connect the diagnostic equipment and check the operation of the display segments at the INSTRUMENT PANEL NODE by means of active diagnosis | End of diagnosis | One or more segments does not come on | Replace the Instrument Panel |
‹ Prev Mil warning light stays on (engine starts)Next › Display does not show headlamp alignment data
Parts & tools for this job For 2005 Fiat Croma
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.