Display does not show headlamp alignment data
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Instrument panel › Display does not show headlamp alignment data
‹ Prev Display module no signal - to check panelNext › Water in diesel filter warning light off (initial test not carried out)
Fault diagnosisDisplay does not show headlamp alignment data
DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA
When the selector which controls the headlamp alignment is operated (with the dipped headlamps on) the information on the display does not change.
| 1 | HEADLAMP ALIGNMENT ELECTRICAL CIRCUIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Check:
| Move on to Step 2 | 1. Connections not correct | 1. Repair the connections | |
| 2. Earths defective | 2. Repair the earth contacts | |||
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check in active diagnosis at the instrument panel that all the display segments are working properly | Move on to Step 3 | One or more segments not working | Replace the instrument panel | |
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | End of diagnosis |
‹ Prev Display module no signal - to check panelNext › Water in diesel filter warning light off (initial test not carried out)
Parts & tools for this job For 2005 Fiat Croma
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.