Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)22 · Fault diagnosis
22 · Diagnostics

Abs failure warning light on

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Instrument panel › Abs failure warning light on
Fault diagnosisAbs failure warning light on

ABS FAILURE WARNING LIGHT ON

N.B: The brake node sends the ABS warning light on message via the C-CAN to the Body Computer which makes it available via the gateway to the Instrument Panel Node through the B-CAN.

If there are any problems in the C-CAN the control unit warning lights which operate on this network will light up. The CAN INFORMATION check is designed to highlight precisely this

0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION

Connect the EXAMINER diagnostic equipment and check the following at the CAN INFORMATION:

  • No control units inactive
  • No faulty control units
  • no control units with faulty CAN
Move on to Step 11. Fault on CAN network1. Continue following the instructions for the diagnostic equipment
2. Impossible to start a dialogue with the Body Computer2. Move on to Step 7
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Keeping the diagnostic equipment connected, check the following at the BRAKE NODE:

  • No system/component errors
  • No CAN faults
Move on to Step 21. System/components faulty1. Continue following the instructions for the diagnostic equipment
2. Fault on C-CAN2. Move on to Step 7
2CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Using the Examiner check, in the Instrument Panel Node, that there are no errors and that the parameters are present.Move on to Step 3Presence of errorsContinue following the instructions for the diagnostic equipment
3ELECTRICAL POWER SUPPLY CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the electrical power supply for the "Instrument Panel Node" is correct.Move on to Step 4Electrical power supply positive and/or earth faulty.Replace defective component (in the case of a fuse, find out what caused it to blow).
4ELECTRICAL CONNECTIONS CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the electrical connections between the Body Computer and Instrument Panel, in particular that each individual pin is correctly connected.Move on to Step 5Electrical connections not working.Renew the damaged electrical connections.
5ACTIVE DIAGNOSIS CHECKALL OKPROBLEMS ENCOUNTEREDACTION
With the Examiner in the Instrument Panel Node ambient check that the ABS warning light is correctly activated in Active DiagnosisMove on to Step 6The ABS warning light does not flash

Replace the instrument panel

Op. 5560B10 CONTROL PANEL - R+R

6CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Using the Examiner check, in the Body Computer Node ambient, that there are no errors and that the warning light status changesMove on to Step 71. Impossible to connect to the Body Computer control unit.1. Move on to Step 7
2. Presence of errors.2. Continue following the instructions for the diagnostic equipment.
3. The parameter values do not change3. Move on to Step 8
7ELECTRICAL POWER SUPPLY CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the electrical power supply for the "Body Computer Node" is correct.Move on to Step 8Electrical power supply positive and/or earth faulty.Replace defective component (in the case of a fuse, find out what caused it to blow).
9CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Check, using the Examiner, that it is possible to connect to the Body Computer Node.Move on to Step 9Impossible to connect to the Body Computer control unit.

Replace Body Computer

Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.