Workshop Manuals Factory service & repair Fiat
Fiat Croma Factory Service Manual (2005-2010)22 · Fault diagnosis
22 · Diagnostics

Sun roof rear blind noisy

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Noise / vibrations › Sun roof rear blind noisy
Fault diagnosisSun roof rear blind noisy

SUN ROOF REAR BLIND NOISY

0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION
Check whether the noise is located along the guideMove on to Step 11. Sliding noise1. Move on to Step 1.
2. Winding noise2. Move on to Step 4.
1CHECK THE SLIDE PADS ARE CORRECTLY FASTENEDALL OKPROBLEMS ENCOUNTEREDACTION
Check the sun blind slide pads are in their seat.Move on to Step 2The pads are not in their seat.Reposition the pads in their seat.
2CHECK THE BLIND METAL REINFORCEMENTSALL OKPROBLEMS ENCOUNTEREDACTION
Check for deformations of the blind metal reinforcements.Move on to Step 3Deformations of the blind metal reinforcements found.

Replace the rear sunblind

Op. 7030B37 FIXED GLASS BLIND - R.R

3CHECK FOR DEFORMATIONS IN THE FINISH TRIMALL OKPROBLEMS ENCOUNTEREDACTION
Check for deformations in the finish trim.Move on to Step 4Check for deformations in the finish trim.

Replace the finish trim

Op. 7030B51 SLIDING ROOF CENTRAL ANTI-WIND NOISE GASKET - R R

4CHECK THE FREE MOVEMENT OF THE BLIND MOVEMENT DEVICESALL OKPROBLEMS ENCOUNTEREDACTION
Check the free movement of the sliding blind cable guide device.End of diagnosis1. Binding detected due to external causes.1. Remove foreign bodies/interference with elements near the drive device.
2. Binding detected due to internal causes.

2. Replace the drive device

Op. 7030B39 SLIDING CURTAIN CABLE GUIDE DEVICE - R R

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.