Dashboard creaking
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Noise / vibrations › Dashboard creaking
DASHBOARD CREAKING
With the vehicle moving, particularly over rough ground or during acceleration or braking, noise can be heard from the dashboard area.
| 0 | PRELIMINARY CHECKS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Road test the vehicle to check the type of noise | Move directly to the relevant step. | 1. Squeaking noise cannot be located. | 1. Move on to Step 1. | |
| 2. Noise from one of the front doors. | 2. Proceed as instructed in the | |||
| 1 | CHECK DASHBOARD/WINDSCREEN COUPLING | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the gap between the lower area of the windscreen and the dashboard is correct: the gap must be sufficiently large for a card to be inserted | Move on to Step 2 | Faulty dashboard fastening. | Renew the felt pads behind the facia in the contact area with the windscreen. | |
| 2 | CHECK OUTLET FASTENINGS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the condition of the air outlet fastening tabs on the dashboard. | Move on to Step 3 | 1. Fault in central outlet fastening. | 1. Renew the correct fastening | |
| 2. Fault in side outlet fastening. | 2. Renew the correct fastening | |||
| 3 | CHECK GAUGE FASTENINGS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the correct fastening of the three gagues behind the steering wheel: in particular, check for the felt pads in the coupling area with the dashboard. | Move on to Step 4 | 1. Faulty fastening of gauges behind the steering wheel. | 1. Restore the correct fastening of the gauges. Replace the felt pads if necessary. See assembly | |
| 2. Faulty fastening of check gauge behind the steering wheel. | 2. Restore the correct fastening of the check gauge. Restore the felt pads if necessary. | |||
| 4 | CHECK STEERING COLUMN TRIM FASTENING | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the steering column trim is correctly fastened to the dashboard. In particular, check for:
| Move on to Step 5 | Faulty fastening. | Restore the correct fastening on the facia. Restore the felt pads if necessary | |
| 5 | CHECK THE CENTRAL TRIM FASTENINGS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the central console trim is correctly fastened to the dashboard. In particular, check for:
| Move on to Step 6 | Faulty central console fastening. | Renew the correct fastening. Restore the felt pads if necessary | |
| 6 | CHECK THE CLIMATE CONTROL MODULE FASTENING | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the climate control unit is correctly fastened. | Move on to Step 7 | Faulty climate control unit fastening. | Renew the correct fastening of the control unit | |
| 7 | CHECK THE GLOVE COMPARTMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the correct fastening of the dashboard glove compartment and its flap. In particular, check for the presence of the rubber pad used to secure the compartment to the dashboard. | End of diagnosis | 1. Faulty glove compartment fastening. | 1. Restore the correct fastening of the glove compartment on the dashboard. Restore the felt pads if necessary | |
| 2. Faulty flap fastening. | 2. Restore the correct fastening of the glove compartment flap on the dashboard. Restore the felt pads if necessary Op. 7040A14 FLAP OF GLOVE COMPARTMENT TRIM ELEMENT (ONE) - ARRANGE | |||
| 3. Flap will not close correctly. | 3. Adjust the striker Op. 7040A14 FLAP OF GLOVE COMPARTMENT TRIM ELEMENT (ONE) - ARRANGE |
Parts & tools for this job For 2005 Fiat Croma
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Croma
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.