Engine RPM SENSOR - R.R.

Operation 1060G20 · Pressure pump electric control

1.9 JTD 8v

Removing

Place the car on a ramp.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

1. Disconnect the electrical connection for the rpm sensor.

2. Undo bolts (2a) and remove rpm and timing sensor (2b).

1.9 JTD 16v

Removing

Place the car on a lift.

Disconnect the battery negative terminal.

- 7055B54 under-engine guard - r r.

1. Disconnect the electrical connection for the rpm sensor.

2. Undo the bolt (2a) and remove the engine rpm sensor (2b).

1.9 JTD 8v

Refitting

Fit the rpm and timing sensor and secure it using the retaining bolt.

Connect the electrical connection

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Remove the car from the lift.

1.9 JTD 16v

Refitting

Fit engine rpm sensor and secure using bolts.

Connect the electrical connection for the rpm sensor.

- 7055B54 under-engine guard - r r.

Connect the battery negative terminal.

Remove the vehicle from the lift.