Lines to injectors - r r

Operation 1060F36 · Injectors and lines

1.9 JTD 8v

Removing

- 1016A10 sound-proofing cover - r + r

Disconnect the battery negative terminal.

1. Disconnect the electrical connections from the injectors.

2. Undo the connectors for the pipes from the injectors.

3. Undo the connectors of the pipes from the single fuel manifold.

4. Remove the fuel manifold and injector connection pipes.

1.9 JTD 16v

Remove the pipes from the fuel manifold to the inectors. Apply to all injectors the procedure shown in operation:

Refer to op. 1060F34 lines to injectors - r r

1.9 JTD 8v

Refitting

Fit new pipes from the manifold to the injectors.

Whenever you work on the pipes from injectors to fuel manifold, always fit a new pipe when reassembling to avoid leakage from the fittings.

Tighten the connectors on the pipes on the return manifold and injectors to torque.

Connect the electrical connections to the injectors.

- 1016A10 sound-proofing cover - r + r

Connect the battery negative terminal.