08 · Engine

Cam angle sensor - r r

Make: Fiat
Model: Stilo Factory Service Manual
Year: 2001–2007
Section: Diesel fuel injection › Cam angle sensor - r r

‹ Prev Engine RPM SENSOR - R.R.Next › Fuel pressure sensor - r r

EngineCam angle sensor - r r

Cam angle sensor - r r

Operation 1060G22 · Pressure pump electric control

1.9 JTD 8v

Removing

- 1016A10 sound-proofing cover - r + r

- 4450B04 right front wheel r r

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1092G10 single engine belt r r

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 1032D12 timing system protective cover(s) - r + r

- 1032B14 toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner

- 1032B40 toothed-driven pulley (one) - r + r with timing belt removed

1. Undo the bolts (1a) and remove the side timing belt protection (1b).

2. Disconnect the electrical connection for the cam angle sensor positioned near the engine oil dipstick.

	Name	Connector
2	Timing sensor	K47

3. Undo the fixing bolts (3a) and remove the cam angle sensor (3b).

1.9 JTD 16v

Removing

- 1016A10 sound-proofing cover - r + r.

Disconnect the battery negative terminal.

	Name	Connector
	Battery	A1B

1. Disconnect the electrical connection from the cam angle sensor.

	Name	Connector
1	Timing sensor	K47

2. Undo the bolt (2a) and remove the cam angle sensor (2b).

1.9 JTD 8v

Refitting

Fit the sensor and tighten the retaining bolt.

Tighten the sensor bolts to torque.

	Fastening	Component	Ø	Value (daNm)
	Bolt	CAM ANGLE SENSOR	M6	0.9

Fastening

Component

Value

(daNm)

Bolt

CAM ANGLE SENSOR

0.9

Connect the electrical connection

	Name	Connector
	Timing sensor	K47

Position the timing belt side shield and tighten the fixing bolts.