Workshop Manuals Factory service & repair Fiat
Fiat Stilo Factory Service Manual (2001-2007)08 · Engine
08 · Engine

Lines to injectors - r r

Make
Fiat
Model
Stilo Factory Service Manual
Year
2001–2007
Section
Diesel fuel injection › Lines to injectors - r r
EngineLines to injectors - r r

Lines to injectors - r r

Operation 1060F34 · Injectors and lines

1.9 JTD 8v

Refer to op. 1060F36 lines to injectors - r r

1.9 JTD 16v

Removing

- 1016A10 sound-proofing cover - r + r

1. Undo the connectors (1a) and (1b) and remove the pipes from the fuel manifold to the injectors (1c).

When refitting, use new pipes from the fuel manifold to the injectors.

Lines to injectors - r r

Refitting

1. Fit new pipes from the fuel manifold to the injectors and fix them using the connectors without tightening them.

2. Tighten the connectors for the pipes from the fuel manifold to the injectors, injector side, to the recommended torque using a suitable spanner.

FasteningComponentØ

Value

(daNm)

2ConnectorFUEL MANIFOLD LINE TO INJECTORSM12 x 1.5(Injector side) 2.3

3. Tighten the connectors for the pipes between the fuel manifold and the injectors, fuel manifold side to the recommended torque using a suitable spanner.

FasteningComponentØ

Value

(daNm)

3ConnectorFUEL MANIFOLD LINE TO INJECTORSM12 x 1.5(Manifold side) 2.3

Clean the threaded seats for the above-mentioned pipe on the manifold and the injectors using heptane.

Lines to injectors - r r

- 1016A10 sound-proofing cover - r + r

Parts & tools for this job For 2001 Fiat Stilo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.