Toothed drive pulley - r + r

Operation 1032B46 · Belt timing system

1.2 16v

Removing

Place the car on a ramp.

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

Disconnect the battery negative terminal.

- 1048A10 air cleaner filtering element - replace

- 1056B60 single fuel manifold pipe, with injectors - r + r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1092B60 alternator drive belt - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032D12 timing system protective cover(s) - r + r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A46 cam shaft left rigid mount - r r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed

1.4 16v

Removing

Place the car on a lift.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 4450B04 right front wheel r r

- 1048A10 air cleaner filtering element - replace

- 1056B60 single fuel manifold pipe, with injectors - r + r

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1092B60 alternator drive belt - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032D12 timing system protective cover(s) - r + r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A46 cam shaft left rigid mount - r r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed

1.6 16v

Removing

Place the vehicle on a ramp.

- 1016A10 sound-proofing cover - r + r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 4450B10 Front WHEEL (one) - R.R.

- 1092B50 alternator/air conditioner compressor drive belt - adjust tension

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A46 cam shaft left rigid mount - r r

- 1032D12 timing system protective cover(s) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1056B82 injection/ignition system e.c.u. (one) - r + r

- 1056B87 ignition/injection system control unit mount - r r

- 1036G49 rear camshaft seal, lh or rh - r r with mount and coil/s removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed

2.4 20v

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

- 4450B04 right front wheel r r

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1016A40 ignition coil cover on cylinder head- r+r.

- 1092D10 air conditioner compressor drive belt - r + r

- 1092B68 belt from a/c compressor to alternator drive r + r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed.

1.9 JTD 16v

Removing

Place the car on a lift.

- 4450B04 right front wheel r r.

- 1016A10 sound-proofing cover - r + r.

Disconnect the battery negative terminal.

- 7055B54 under-engine guard - r r.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R..

- 1092G10 single engine belt r r.

- 1092G14 engine component single belt mobile tensioner - r + r.

- 1092G21 engine component single belt fixed tensioner - r rwith belt removed

- 1032D12 timing system protective cover(s) - r + r.

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

- 1032B44 toothed drive pulley - r + r with timing belt removed.

1.2 16v

Refitting

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1008A46 cam shaft left rigid mount - r r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1032D12 timing system protective cover(s) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1092B60 alternator drive belt - r + r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1056B60 single fuel manifold pipe, with injectors - r + r

- 1048A10 air cleaner filtering element - replace

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

Remove the vehicle from the ramp.

1.4 16v

Refitting

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1008A46 cam shaft left rigid mount - r r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1032D12 timing system protective cover(s) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1092B60 alternator drive belt - r + r

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1056B60 single fuel manifold pipe, with injectors - r + r

- 1048A10 air cleaner filtering element - replace

- 4450B04 right front wheel r r

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

Remove the vehicle from the lift.

1.6 16v

Refitting

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1036G49 rear camshaft seal, lh or rh - r r with mount and coil/s removed

- 1056B87 ignition/injection system control unit mount - r r

- 1056B82 injection/ignition system e.c.u. (one) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032D12 timing system protective cover(s) - r + r

- 1008A46 cam shaft left rigid mount - r r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1092B50 alternator/air conditioner compressor drive belt - adjust tension

- 1092B54 alternator/water pump drive belt - adjust tension

- 4450B10 Front WHEEL (one) - R.R.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 7055B54 under-engine guard - r r

Disconnect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 1016A10 sound-proofing cover - r + r

Remove the car from the ramp.

2.4 20v

Refitting

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1092B68 belt from a/c compressor to alternator drive r + r

- 1092D10 air conditioner compressor drive belt - r + r

- 1016A40 ignition coil cover on cylinder head- r+r.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 7055B54 under-engine guard - r r

- 4450B04 right front wheel r r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

1.9 JTD 16v

Refitting

- 1032B44 toothed drive pulley - r + r with timing belt removed.

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

- 1032D12 timing system protective cover(s) - r + r.

- 1092G21 engine component single belt fixed tensioner - r rwith belt removed

- 1092G14 engine component single belt mobile tensioner - r + r.

- 1092G10 single engine belt r r.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R..

- 7055B54 under-engine guard - r r.

Connect the battery negative terminal.

- 1016A10 sound-proofing cover - r + r.

- 4450B04 right front wheel r r.

Remove the vehicle from the lift.