Glass - alpine light (page 2 of 2)

12. Position glass to body and align to reference tape.
13. Lightly press glass to ensure correct profile.
14. Secure glass with tape until sealer has cured.
15. Remove protective covers and tape.
16. Test sealer for leaks, apply additional sealer if necessary. If water is used, allow sealer to dry before testing. Spray water around glass and check for leaks. Mark any area that leaks. Dry glass and sealer then apply additional sealer.

CAUTION: A curing time of 6 hours is desirable. During this time leave a window open to ventilate the vehicle interior. If the vehicle must be used before the curing time has elapsed, do not drive at speed or slam the doors with the windows closed.