L322 Range Rover Service Procedures
SEATS
76-5-12 REPAIRS
5. Carefully release squab cover beading from top
of rear squab frame.
6. Release velcro to reveal screw securing rear
armrest trim to squab finisher, remove screw.
7. Carefully release 11 retaining clips securing
armrest rear finisher to front finisher, remove
finisher.
8. Carefully prise back finisher, releasing
adhesive.
9. Remove finisher from squab.
Refit
1. Apply suitable adhesive to finisher.
2. Position and fit finisher to squab.
3. Position armrest rear finisher and secure
retaining clips.
4. Fit screw securing armrest rear finisher and fit
velcro.
5. Position and fit top cover beading to squab
frame.
6. Position rear lower squab finisher and secure
retaining clips.
7. Fit screws securing lower squab finisher.
8. Position latch finisher and secure clips.
9. Reposition rear seat.
Finisher - seat base rear
$% 78.55.08
Remove
1. Remove LH rear seat.
2. Remove 2 screws securing RH seat fold
mechanism finisher and remove finisher.
3. Remove 3 screws securing LH seat fold
mechanism finisher and remove finisher.