Range Rover P38
LAND ROVER V8
37
REPAIR
6. Remove 3 of 4 nuts and bolts securing each side
of crossmember to chassis.
7. With assistance, remove remaining bolt securing
crossmember and remove crossmember.
8. Remove 4 bolts securing mounting to gearbox.
9. Remove mounting assembly.
Refit
CAUTION: Ensure all under body wax is
removed from mating surfaces of fixings
before fitting.
10. Fit mounting to gearbox, fit bolts and tighten to
45 Nm (33 lbf.ft)
11. Using assistance, fit crossmember to chassis.
12. Fit nuts and bolts and tighten to
45 Nm (33
lbf.ft)
13. Fit transmission snubber bar.
14. Fit NEW flange nuts and bolts securing
transmission mount to crossmember and tighten
to
45 Nm (33 lbf.ft)
15. Remove transmission stand.
16. If applicable, align rear of side acoustic covers to
crossmember and secure with bolts.