LATCH REAR SQUAB
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › LATCH REAR SQUAB
78 - SEATSLATCH REAR SQUAB
SEATS
21
REPAIR
Refit
16. Reverse removal procedure.
LATCH REAR SQUAB
Service repair no - 78.80.16.
Remove
1. Lower rear seat squab.
2. Remove parcel tray and trim support panels.
See CHASSIS AND BODY, Repair.
3. Disconnect squab release rod from latch.
4. Remove 2 screws securing latch. Remove latch.
Refit
5. Reverse removal procedure.
6. Tighten latch securing screws to
14 Nm. (10
lbf.ft)
Parts & tools for this job For Land Rover Range Rover
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Range Rover
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.