Range Rover P38
SEATS
23
REPAIR
11. Remove 4 screws securing motor to mounting
bracket.
12. Release forward/rear slide bracket from rear
cross tube.
13. Raise slide bracket. Disconnect drive cable from
gearbox.
14. Remove drive cable from motor. Remove motor
from mounting bracket.
15. Remove second drive cable from gearbox.
Refit
16. Reverse removal procedure.
MOTOR - HEADREST - FRONT SEAT - up to 99MY
Service repair no - 78.70.31
Remove
1. Remove front seat.
See this section.
2. Remove 2 plugs from seat inner valance
retaining screws. Remove 2 screws. Remove
valance.
3. Remove 2 clips securing squab cover retainer to
cushion frame. Release retainer.