Range Rover P38
78
SEATS
NEW RANGE ROVER
32
REPAIR
MOTOR - RISE AND FALL - FRONT SEAT - from
99MY
Service repair no - 78.70.27
Remove
1. Remove front seat.
See this section.
2. Disconnect and release multiplug from bracket.
3. Remove roll pin securing motor.
4. Remove spring clip securing operating rod to
lever.
5. Release and remove motor assembly.
Refit
6. Clean lever pivot and smear with grease.
7. Position motor assembly and locate operating
rod to lever. Fit new spring clip.
8. Align motor and fit new roll pin.
9. Connect multiplug and secure to bracket.
10. Fit seat.
See this section.