Range Rover P38
78
SEATS
NEW RANGE ROVER
10
REPAIR
8. Disconnect 4 multiplugs underneath seat and
remove seat from vehicle.
Refit
9. Fit seat to vehicle, connect multiplugs, align seat
to mountings and tighten torx bolts to
29 Nm
(21 lbf.ft).
10. Position seat belt to seat and tighten bolt to
32 Nm (23 lbf.ft). Fit bolt cover.
11. Fit both rear seat base finishers and secure with
fixings.
12. LH seat: Fit seat base finisher and secure with
fixings.
13. RH seat: Fit screw securing finisher and fit fuse
box cover.
14. Connect battery, earth lead last.
COVER - CUSHION - FRONT SEAT - from 99MY
Service repair no - 78.30.01/81
Remove
1. Remove front seat.
See this section.
2. Remove bolt securing seat belt stalk.
3. Remove seat belt stalk.
4. Remove 2 screw covers.
5. Remove 3 screws securing inner side finisher.
6. Remove side finisher.
