Range Rover P38
SEATS
37
REPAIR
Refit
6. Hold latch in vice. Position seat belt stalk.
Secure with bolt. Tighten to
35 Nm. (26 lbf.ft)
7. Position latch. Align to cushion and squab.
8. Secure with screws. Tighten to
30 Nm.
(22 lbf.ft)
9. Fit latch cover. Secure with screws.
10. Return seat to original position.
SWITCH - FRONT SEAT CONTROL
Service repair no - 78.70.89
Remove
1. Remove 2 screw plugs from seat valance.
2. Remove 2 screws securing valance.
3. Release stud securing harness to seat frame.
4. Disconnect harness from seat ECU.
5. Remove valance/switch assembly.
Refit
6. Reverse removal procedure.