Range Rover P38
78
SEATS
NEW RANGE ROVER
6
REPAIR
Refit
6. Locate drive cable to motor and secure with clip.
7. Align motor to frame and fit Torx screws.
8. Locate cable to headrest saddle and fit clip.
NOTE: Cable run is under squab cover
shock cord retention wire.
9. Fit squab cover.
See this section.
FRONT SEAT - up to 99MY
Service repair no - 78.10.44/99
Remove
1. LH Seat Only: Remove 4 studs securing cover
at base of seat.
2. RH Seat Only: Remove 3 studs from cover at
base of seat.
3. Remove fuse cover for access to retaining
screw. Remove screw.