Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)18 · Heating & ventilation
18 · Heating & A/C

Heater

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Repairs › Heater
Heating & ventilationHeater · page 1 of 3

HEATER

Service repair no - 80.20.01

WARNING: See RESTRAINT SYSTEMS, Precautions.

Remove

  1. Make the SRS system safe See RESTRAINT SYSTEMS, Precautions.
  2. Remove fascia. See BODY, Interior trim components.
Heater – Remove fascia. See BODY, Interior trim components.
  1. Remove 2 nuts securing anti-theft alarm ECU to heater control unit, position ECU aside.
  2. Drain cooling system. See COOLING SYSTEM, Adjustments.
Heater – Drain cooling system. See COOLING SYSTEM, Adjustments.
  1. Remove 2 screws retaining outer cables to control unit.
  2. Release cables from control unit.
  3. Disconnect 2 multiplugs and remove control unit.
  4. Remove 2 screen ducts from heater.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.