Workshop Manuals Factory service & repair Rover
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition03 · Engine
03 · Engine

Installation

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Cylinder block: repairs › Installation
EngineInstallation

Installation

The seal surface on the block should be dry. Apply a light coat of oil to the crankshaft and to the lip of the seal.

Crankshaft oil seal assembly
  1. 18G1485
  2. 12M0755A
  3. Drive in crankshaft oil seal against right side cover.

Note:

  • Install seal with part number side facing out.
  • Drive the crankshaft oil seal in squarely.
Cross-section detail showing clearance between right side cover and crankshaft oil seal
  1. A Right Side Cover
  2. B Crankshaft Oil Seal
  1. Confirm with a feeler gauge that the clearance is 0.5 – 0.8 mm and is equal all the way around.

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.